Skip to main content

Communication Server configuration

To configure the Security Server to communicate with GravityZone for manual installs, follow these steps:

  1. From the main menu, select option 3 Communication server configuration.

  2. Select Configure Communication Server.

  3. Select one of the following options for the Communication Server, based on your browser's URL:

    • For cloudgz.gravityzone.bitdefender.com: GZ Cloud Instance 1

    • For cloud.gravityzone.bitdefender.com: GZ Cloud Instance 2

    • For cloudap.gravityzone.bitdefender.com: GZ Cloud Instance 3

    • For cloudrbx.ovh.gravityzone.bitdefender.com: GZ RBX Cloud Instance

    • For cloudham.s11.gravityzone.bitdefender.com: GZ SysEleven Cloud Instance

    • For cloudher.dts.gravityzone.bitdefender.com: GZ DTS IT AG Cloud Instance

  4. (Optional) If you are using a relay, go to Configure Relay Server.

    Enter the relay address and the Relay ID, which can be found in the GravityZone Control Center > Network > Computers and Groups > select your relay > General.

    Afterwards, go to Change Priorities and select Relay first, ECS second.

    Important

    This address must be the same as the one that appears in Control Center policy settings. To check the link, go to the Policies page from the left side menu, add or open a custom policy, navigate to the General > Communication > Endpoint Communication Assignment section and enter the Communication Server name in the column header field. The correct server is going to be displayed in the search results.

  5. Configure Communication Mode is set to Strict, which enforces secure communication, and cannot be changed.

  6. Select Save & Apply to save changes.

In this section: